Product range
Rotary hammers, breakers and concrete tools for construction buyers
Hammers, breakers, vibrators and cutters for the half of a building that is concrete rather than timber. Quoted with the bit or blade set your crews actually use, and on the voltage their site actually has.
- Samples from 1 unit
- OEM/ODM from 30 units
- CE as standard
- FOB Shenzhen / Ningbo / Yiwu
Concrete & construction we supply
Every model below ships with the voltage, plug type and packaging your market needs. None of them are listed with a price, because the right price depends on your configuration, your quantity and your port.
-
SDS-Plus Rotary Hammer, 800 W
An 800 W SDS-Plus rotary hammer for anchor and fixing holes in concrete, with three modes and a vibration-damped rear handle.
Specification & quote -
Hex Demolition Hammer, 1600 W
A 1600 W breaker with a hex shank for chiselling, breaking and demolition, with an anti-vibration system rated for continuous site use.
Specification & quote -
Concrete Vibrator with Poker, 1500 W
A 1500 W concrete vibrator with a 35 mm poker for compacting slabs, columns and foundations without honeycombing.
Specification & quote -
Electric Tile Cutter, 1200 W
A 1200 W wet tile cutter with a 110 mm diamond blade for tile, marble and stone on site, with a sliding table and adjustable mitre.
Specification & quote
Configuration
What you can change before we produce
None of this is fixed until you approve it in writing. These are the options buyers change most often on Concrete & construction orders:
- SDS-Plus or SDS-Max / hex tool holder
- Voltage 110 V or 220-240 V and destination plug
- Bit, chisel or blade set included in the carton
- Vibration control and soft-start where the site requires it
- Carry case or plain export carton
How our OEM/ODM programme works · How we inspect before shipping
Where these tools are used
- Drilling anchor and fixing holes in concrete and stone
- Chiselling, breaking and demolition work
- Foundation, slab and column casting
- Tile, marble and stone cutting on site
- Road, kerb and drainage repair crews
Market notes. Construction tools are the easy half of this trade and the most crowded, so the question is not whether a hammer can be bought but whether it survives the job it is bought for. On African and Middle Eastern sites the two things that end a tool early are heat and dust: a hammer rated for intermittent DIY work runs continuously on a site, and a breaker run without a dust seal eats its own piston. Ask for the duty rating and the impact energy rather than the wattage, and be explicit about whether the crews are drilling anchor holes all day or breaking out a slab once a month. Site voltage is the other trap: 110 V on a Gulf site or 60 Hz in Saudi Arabia is a different tool, not a different plug.
Concrete & construction — buyer questions
What is the difference between a rotary hammer and a demolition hammer?
A rotary hammer drills and can chisel; it spins the bit and hammers it at the same time. A demolition hammer only chisels, but with a much heavier blow and no rotation, which is why it breaks out a slab that a rotary hammer would only scratch. Most sites need both, and most first orders buy the rotary hammer and rent the breaker until the volume justifies buying one.
Which chucks and bits should I stock?
SDS-Plus covers drilling up to about 26 mm and is the volume tool in every market we ship to. SDS-Max and hex shanks are for the heavier breaker and chiselling work. Bits and chisels are the repeat purchase and the reason a customer comes back, so the shank standard you choose matters more than the drill itself.
Do you supply the tools with a case?
Case or plain export carton, your choice, and it changes both the carton dimensions and the freight volume. A blow-moulded case adds cost and cubic metres; a plain carton is what most importers choose once they are shipping pallet quantities rather than singles.
Buyers of Concrete & construction usually order these too
-
Angle Grinders
Corded 100 mm grinders for volume, brushless cordless models from 12 V up, and 3-inch mini models for light fabrication work. Every unit ships with the plug type and voltage your market uses.
-
Cordless Drills
18 V brushless drills with a two-speed gearbox and hammer function, plus compact 12 V drivers. Private-label bodies, colours and packaging available from 30 units.
-
Electric Chain Saws
Corded electric chain saws built for firewood cutting, palm and tree trimming and carcass work. This is the category where we have the longest export track record.
-
Electric Wool Shears
Corded and battery sheep shears, cattle and horse grooming clippers, and the cutter and comb sets that repeat every season. A low-competition category that suits livestock-heavy markets across Africa and the Middle East.
-
Heat Guns
Compact cordless heat guns with adjustable temperature, plus corded models at higher wattage. Popular with electricians, decorators and automotive trades.
-
Electric Screwdrivers
Rechargeable screwdrivers for assembly and installation work, plus 3.6 V precision sets for phone, laptop and electronics repair.
-
Air Dusters & Blowers
High-speed brushless blowers for dusting, drying and cleaning — from compact air dusters to 140,000 RPM turbine models and the X64 handheld unit.
-
Water Pumps & Irrigation
Solar and mains-powered pumps for field irrigation, boreholes and livestock water supply. Quoted against the flow and head you actually need, not against a headline wattage.
-
Outdoor & Garden Power Tools
Battery and corded tools for clearing, trimming and grounds maintenance. Built for overgrown plots and roadside verges rather than for a manicured lawn.
-
Feed & Grain Processing
Machines that turn grain, forage and by-products into feed on the farm or in a small mill: grinding, mixing, chopping and shelling. Sized in tonnes per hour against your stock numbers rather than against a horsepower badge.
-
Solar Power & Off-Grid
The supply side of a solar system: panels, hybrid inverters, lithium storage and portable kits, quoted as a matched set against the load you actually need to run.
-
Poultry & Livestock Equipment
Incubation, processing and rearing equipment for poultry and small livestock: sized in eggs, birds per hour and animal numbers, and quoted with the spare parts that keep it running.
Send us your Concrete & construction list, get one written quotation
Tell us the models and quantities you are comparing, plus your destination port. One reply covers all of them, with MOQ, lead time and packing — not just a price.